Wire mesh fence is a steel fence using wire strands welded together to form a high strength mesh. Welded wire mesh fences are used predominantly as high security barriers where visibility through the fence is necessary or desirable.
Welded wire mesh
1.03m, 1.23m, 1.53m, 1.73m, 1.8m, 1.93m, 2.03m, 2.23m, etc
2m, 2.5m 3m, etc
3.5-8mm, mainly 4mm, 4.5mm, 5mm
50x200mm, 50x100mm, 50x150mm, 75x150mm
2, 3, 4 or 5 folds
Hop dipped galvanized and subsequently epoxy polyester powder coated
Green, red, blue, yellow, black, white, etc
Square post: 50x50mm, 60x60mm
Rectangular post: 40x60mm
Round post: 38mm, 40mm, 42mm, 48mm OD
Peach post: 50x70mm, 70x100mm
2m, 2.2m, 2.4m, et
A complete set: fence panel, post, cap, clip
Different fence post:
Welding wire mesh panel - sand blast - deoil - washing - phosphating - hot blast drying (200 degree) - epoxy polyester powder coating - hot blast drying (120 degree) - packing
1. wire mesh panel welding
2. Sand blast: will make fence surface uneven, so powder would stick to fence surface strongly
3. Deoil, washing and phosphating could form the chemical, phosphrous, on fence surface
4. hot blast drying, 120 degree
5. Epoxy polyester powder coating
6. Hot blast drying (120 dgree)
7. Take fence off from the production line
Each post will be wrapped with plastic film to resist humidity during shipping.
Bundle up the posts with metal strip
Cardboard at the top and bottom of the panel to protect fence panels being crushed
Panels are wrapped with plastic film to resist humidity on the sea
4 pieces angle steel to prevent panels from collision
Steel pallet under the panel to withstand the pressure
Fence installation photo from our Colombia client.
Double wire mesh fence, 358 anti climb fence, palisade fence, roll top fence, barbed wrie, razor wire, etc are also available.
Contact us if you need a quotation.